do88 Intake Manifold with Intercooler, BMW F-Series (B48 GEN1) | F & G-Chassis, B48 B46 - BMW - By vehicle | from do88.se

Product added to the shopping cart

Product image

Continue shopping
Go to checkout

All product development is carried out in our facility in Nykvarn, Sweden

Fast deliveries from our warehouse
Qualified customer support
Fast deliveries
Customer support

do88 Intake Manifold with Intercooler, BMW F-Series (B48 GEN1)

USD 1709.45
Article nr: 
ICM-530-K
 
Add to shopping cart
  • Fast deliveries
  • Great support
  • Worldwide shipping
Product description

Increase the performance of your BMW B48 with the do88 intake manifold with intercooler!

Background
BMW's four-cylinder B48 engine has proven to be a very capable turbocharged engine with great tuning potential and excellent possibilities for increased power. The B48 is equipped with a water/air intercooler, paired with a front-mounted heat exchanger.

The heat exchanger, which is essentially a front-mounted coolant radiator, helps cool the coolant circulating through the intercooler, which in turn transfers heat from the pressurized intake air. This is a conventional and efficient solution.

On the B48, the intercooler itself is integrated into the intake manifold, making the complete design space-efficient, but also more complex. This places high demands on an aftermarket manufacturer like us. It requires finesse – both in design and execution!

We have previously developed intake manifolds with integrated intercoolers for the B58, where extensive testing has given us valuable experience and knowledge of effective design solutions. With that experience behind us, the next step was a natural one: developing a solution for the four-cylinder B48 engine.

We have therefore built on proven design principles and further developed the solutions with the specific requirements of the B48 engine in focus. In this way, we have been able to create a high-performance intake manifold developed specifically for the B48.

Challenges with the OEM components
Cars with a tuned B48 engine can experience heat saturation, commonly known as heat soak. This is particularly common during track driving but can also occur during spirited driving on public roads. As a consequence, the ECU may reduce engine power to protect the engine and, in some cases, enter a reduced-power mode.

The engine is equipped with direct injection, which certainly has its advantages in terms of engine operation and efficiency, but also has limitations when it comes to more extensive tuning or flex-fuel calibrations.

To overcome this, many install additional port fuel injectors using a spacer between the intake manifold and cylinder head. The disadvantage of this type of solution is that the injectors can end up at an unfavorable angle. The fuel may hit the walls of the intake ports, which can increase the risk of unwanted fuel accumulation and poorer spray pattern.

As in many other cases, the OEM components are designed for the manufacturer's specified power level, but can become a limiting factor at higher power outputs – especially in terms of airflow and cooling capacity.

The plastic construction of the OEM intake manifold can also become a weak point as boost pressure increases.


do88's solution

Proven solutions – developed for the B48
In the development of our new B48 intake manifold, we have made use of the experience gained from our successful B58 intake manifold.

We have built further on proven design principles, including the design of the intercooler core and the distribution of air and coolant. At the same time, the geometry and functions of the intake manifold have been developed specifically around the requirements of the B48 engine.

Bar&Plate intercooler core
Our intake manifold features a water/air Bar&Plate intercooler core, designed with very thin and densely packed cooling fins to ensure efficient heat transfer.

The core measures a substantial 102 mm (4”) in thickness!

During development, extensive evaluations were carried out on the density and design of the cooling fins on both the air and coolant sides. This work resulted in a well-balanced combination of airflow, pressure drop and cooling capacity.

By using our proven intercooler core technology, we have been able to take advantage of previous development work while focusing specifically on the B48 engine's requirements for efficient charge air cooling.

Innovative design – cast end tanks
The charge air and coolant are distributed across the intercooler core through carefully designed cast end tanks.

The design has undergone extensive design studies, evaluations, revisions, Computational Fluid Dynamics (CFD) analysis and several 3D-printed prototypes before reaching the final design. These experiences have directly guided the development of the B48 intake manifold.

The tanks are manufactured from cast aluminum. CNC machining would have been a viable alternative, but would mainly have added higher manufacturing costs without any obvious performance advantage. For us, it is about achieving the highest possible performance in the most efficient way. Casting also allows complex shapes and internal geometries that in some cases cannot be achieved through conventional CNC machining.

Engine cover compatibility
An important objective during development was to retain full compatibility with the OEM engine cover.

The final result is a high-performance design with a discreet appearance and retained OEM fitment. Even with the optional fuel rail installed, the OEM engine cover can still be used with minor modifications. This is an important feature for enthusiasts who want to combine high performance with an engine bay that retains its original appearance.

The complete package is all about the details, and we are proud to have retained the possibility of using the engine cover!


Key features

Outlet tank design – prepared for port fuel injectors
Our outlet tank is prepared and designed for four additional port fuel injectors, one for each cylinder. A unique, custom-designed fuel rail with female AN8 connections is available separately and can easily be installed on the intercooler outlet tank. The product is designed for Injector Dynamics ID1050x-34-14 (ID1050x-34-14-14) or Bosch EV14 Compact (K) fuel injectors. This provides the possibility to supply additional fuel at higher power levels or when using alternative fuels such as E85.

The injector positions are integrated directly into the intake manifold design, allowing for a more suitable injector angle compared with using a separate spacer between the intake manifold and cylinder head. If additional injectors are not used, plugs are included to easily seal these openings. In addition, each intake runner is equipped with 1/8” NPT ports for methanol or nitrous oxide injection.

Sensor and vacuum ports
Integrated into the intake manifold are three additional 1/8”-27 NPT ports. These provide the possibility to connect additional sensors, measure supplementary parameters or use additional vacuum and pressure connections. Suitable plugs are included to safely seal any ports that are not used.

The rear coolant tank also features two 1/8” BSPT ports. These are strategically positioned and serve two functions. As the coolant tank is internally divided, two temperature sensors can be installed to measure the temperature difference between the intercooler coolant inlet and outlet.

The ports also make bleeding the cooling system easier, as they are positioned at the highest point of the system. Suitable plugs are included when these functions are not used.

Advanced heat management
The intercooler is supplied with a thick thermal insulating spacer designed to limit heat transfer from the cylinder head to the intake manifold. This is particularly important because the intake manifold is manufactured from aluminum, a material that offers excellent strength but also has higher thermal conductivity than the plastic construction of the OEM intake manifold. By insulating the intake manifold from the cylinder head, unwanted heat transfer is reduced, helping to combat heat soak and creating better conditions for efficient charge air cooling.

The spacer is also equipped with custom-made seals positioned in precision-machined grooves. This provides a secure and reliable seal without the need for sealing compound or other, less controlled sealing methods.

Performance testing
Performance testing is planned for spring 2027. Swedish winter = less-than-ideal testing conditions.

Our B48 intake manifold is based on proven design principles for airflow and cooling performance. The next step is to document the results of the finished B48 design.

To provide fair comparisons between the OEM intake manifold and our new design, we will carry out thorough testing once the ambient temperatures provide better conditions for evaluation.

The results will be published once testing has been completed.


Product details:

  • Bar&Plate water/air intercooler core, 102 mm thick compared with the OEM 56 mm. 12 coolant rows compared with 9 rows in the OEM core.
  • More oxygen to your engine, less restriction and better airflow! Airflow at 0.1 bar / 1.45 psi pressure drop: XXX CFM (XXX CFM OEM), XXX % higher! See the graph below the product images once testing has been completed.
  • Lower inlet air temperature under identical conditions: XXX °C compared with OEM XXX °C. Exact figures will be presented after testing has been completed.
  • Designed in SolidWorks using Computational Fluid Dynamics (CFD).
  • Allows access to the oil filter. The intake manifold does not need to be removed during an oil change.
  • Integrated sensor block with three 1/8”-27 NPT ports for measuring additional parameters.
  • Fuel rail available separately as an optional accessory (not included) for four additional port fuel injectors supplying fuel through the intake manifold.
  • Plugs for sealing the additional injector ports are included.
  • Each intake runner is prepared with 1/8” NPT ports for nitrous oxide or methanol injection.
  • Two 1/8” BSPT ports on the rear coolant tank for easy bleeding and the possibility to install separate temperature sensors.
  • Supplied complete with all accessories, brackets and components required for installation.
  • Compatible with the OEM engine cover as well as aftermarket engine covers using the OEM mounting points. The optional fuel rail can also be used with the engine cover with only minor modifications.
  • Thermal insulating spacer reduces heat transfer from the cylinder head to the intake manifold.
  • Proven intercooler core technology with carefully developed solutions for air and coolant distribution.
  • Plug and Play! No modifications are required when installing the base product.
Fits model

BMW 1' 120i 125i (F20 F21)
Engine: B48 Gen 1
Model Years: 07/2016 - 06/2019

BMW 2' 220i 230i 230iX (F22 F23)
Engine: B48 Gen 1
Model Years: 07/2016 - 06/2021

BMW 3' 320i 320iX 330i 330iX (F30 F31 F34)
Engine: B48 Gen 1
Model Years: 07/2015 - 10/2019

BMW 3' 330e (F30)
Engine: B48 Gen 1 (Plug-in Hybrid)
Model Years: 11/2015 - 10/2018

BMW 4' 420i 420iX 430i 430iX (F32 F33 F36)
Engine: B48 Gen 1
Model Years: 03/2016 - 06/2021

OE-ref. / Replaces
11618603914

You might also be interested in

Recently viewed: